Ll140 Rgb 140mm Dual Light Loop Rgb Led Pwm Fan — Single Pack

Available in 2 Size 2 Colours

L-Unite SOFTWARE FOR
A MORE Visceral Rooter CONTROL

With the toggle of a switch, changing control between motherboard software and the L-Relate is a air.

Run L-Get in touch as administrator
We recommend updating the latest translation and update the firmware of the controller to heighten your overall live.

When L-Connect posterior't control the fan stop number and lighting effects, please download the set.

1. Unplug the USB and SATA Cable of the UNI HUB
2. Close and exit MSI dragon center and L-link up software program.
3. Download L-Connect Repair , and run UP_MousePad.bat
4. To check if it is downloaded correctly, please direct to your download file experience details and deterrent if the charge version is 1.0.3.0
5. Plug back the USB and SATA cables and reboot the system.

Note : Please get along not download any software regarding L-Connect update apart from LIAN Li internet site. This might fall out UNI HUB(Controller) dysfunction.

Eminence

1. Purchase a ternion-pack SL120 or a two-pack SL140(including a controller) as the neophyte kit for fully experienced UNI FANs with L-Connect. To control all 16 UNI FANs (4 fans for each one cluster) in ace spell, a controller is necessary, no matter control with L-Connect software program or sync to the motherboard. Please note that the single-pack edition does not control this controller.
2. Delight enter your motherboard BIOS and set the correspondent fan heading at PWM mode. (Update your motherboard BIOS if necessary)
3. Do non connect more 10 UNI FANs (device up to 21W) to the controller (UNI HUB) when playacting white static color. To connect more devices, please update to L-Link up 2 (reference to update guide) and use 2 or many controllers.
4. Listed radiators are legendary not compatible with UNI FAN.

1. 1. ARCTIC Liquid Freezer Deuce Series
   2. CORSAIR iCUE H115i RGB PRO XT Liquefied Mainframe Ice chest
   3. CORSAIR Hydro Series™ H110i GT 280mm Extreme Operation Liquid CPU Cooler
   4. Radiators that doesn't travel along hollo rule:
      Rule 1// The tubes of the radiator must avoid the tenon of the UNI FAN and glucinium at the safe area, which is in grey in the image.

Rule 2// The screw holes between the 2 fans must be 15mm width on the radiator for either 120mm or 140mm UNI Winnow.

Check your "Reckoner Management" → "Twist Manager" If your MB detected UNI FAN, it would show "LIAN LI" under "Universal Serial Bus Device" If there are error under "Worldwide Order Motorbus Controllers", please contact your MB company for help. Bank check if all 3 cables of the controller are correctly connected to the MB. Switch other USB2.0 header if necessary.

If you can see "LIAN Fifty-one" at the device manger, re-install your L-Connect as an Administrator.

The settings are scrawled in L-Connect package, you have to run L-Tie in to develop your settings. Please set L-Connect running as the computer starts. Following steps: Click "Windows" + "R" Enter : "cuticle:startup" Click "O.k." Copy your "L-Connect" to "Startup" file Restart your PC

Recommend you connect the controller's PWM cable to the system/material body fan header (not the CPU nor ticker rooter header). You could wire the fan's PWM cable to the CPU header directly if you utilise UNI FANs for your AIO.

Please enter your Bachelor of Medicine BIOS to check if your fan header is at PWM mood (not DC mode nor Auto mode).

Please follow hollo steps to solve the problem.
1. Transfer L-Connect software and reboot
2. Close MSI dragon center software and install this Mend Software and reboot
3. Re-install L-Connect

1. Please make a point that your pc have detected [LIAN LI] from Device Manager
2. Blend to [ C:\Platform Files\ENE\Aac_ENE_MousePad_HAL ]
3. Right click [ AacHal_x64.dll ], go to [ Properties ] and ensure Mouse mat Version
4. MousePad variation shall follow [ 1.0.3.0 ], if not please exit all the RGB controlling software in your system, including L-Connect, and download L-CONNECT FIX
5. Run [ UP_MousePad.bat ]
6. Check the File version again, shall be [ 1.0.3.0 ] to clear the hitch. If not, please run [ UP_MousePad.squash racquet ] again.
7. After updating the software, delight boot your pc.

USER MANUAL DOWNLOAD

SPECIFICATIONS

Model	UNI Sports fan SL120	UNI FAN SL140
Fan Proportion	120 X 120 X 25 ( mm )	140 X 140 X25 ( mm )
Rated Electromotive force	DC 12V(FAN) & 5V(LED)	DC 12V(FAN) & 5V(LED)
Fan Speed	800~1900RPM	500~1500RPM
Goop. Atmospheric pressure	2.54mmH2O	1.67mmH2O
Grievous bodily harm. Air Flow	58.54CFM	70.5 CFM
Acoustical Racket (Min-Max.)	31dB(A) Goop	30dB(A) Max
Barred Current	>= 50mA	>= 10mA
Bearing Type	Fluid Dynamic Bearing(FDB)	Fluid Dynamic Bearing(FDB)
Start-up Voltage	DC 6.0V	Direct current 6.0V
Input Current	180mA(Winnow) /600mA (Light-emitting diode)	100mA(FAN) / 340mA (LED)
Input Power	5.16Watt	3.6W
Warranty	2 year	2 year

Ll140 Rgb 140mm Dual Light Loop Rgb Led Pwm Fan â€" Single Pack

Source: https://lian-li.com/product/uni-fan-sl/